Microsoft announced alongside HoloLens 2 early in 2019. Both devices use the same mixed-reality camera module, using a time-of-flight depth sensor to map objects around the camera. But where HoloLens is a wearable mixed-reality device, the Azure Kinect modules are intended to provide Azure-hosted machine learning applications with connected sensors that can be mounted anywhere in a workspace.
Azure Kinect is a direct descendent of the second-generation Kinect modules that shipped with the Xbox One, but instead of providing real-world inputs for gaming, it’s targeted at enterprise users and applications. Intended to work with Azure’s Cognitive Services, the first Azure Kinect developer kit started shipping at the end of 2019 in the United States, adding several other countries in early 2020.
Opening the box
The $399 Azure Kinect Developer Kit is a small white unit with two camera lenses, one for a wide-angle RGB camera and one for the Kinect depth sensor, and an array of microphones. It has an orientation sensor, allowing you to use the camera to build complex 3-D images of environments, ready for use in mixed reality. You can chain multiple devices together for quick 3-D scans or to provide coverage of an entire room, using the orientation sensor to help understand device position.
Along with the camera unit, you get a power supply, an Allen key to remove the chaining ports cover, and a USB cable to connect to a development PC. I’d recommend getting a desktop tripod or another type of mount, as the bundled plastic stand is rather small and doesn’t work with most desks or monitors. There’s no software in the box, only .
Before you get started, you should update the device firmware. This ships with the SDK and includes a command line installation tool. When you run the updater it first checks the current firmware state before installing camera and device firmware and then rebooting. Once the camera has rebooted, use the same tool to check that the update has installed successfully. If there’s a problem with an install you can use the camera’s hardware reset (hidden under the tripod mount) to restore the original factory image.
Sensing the world
you get access to the device sensors from your code. There are three SDKs: one for low-level access to all the camera’s sensors, another to use the familiar Kinect body-tracking features, and one to link the camera’s microphone array to Azure’s speech services. A prebuilt Kinect Viewer app shows the available camera views and streams data from the device’s sensors. You get access to the wide-angle RGB camera, a depth camera view, and the image from the depth sensor’s infrared camera. SDKs are available for both Windows and for Linux, specifically Canonical’s Ubuntu 18.04 LTS release, and can be downloaded directly from Microsoft or from GitHub.
. It lets you see how the different depth camera modes operate, helping you choose either a narrow or wide field of view. You can see data from the position sensors, both the accelerometer and gyroscope, and from the microphone array. With the Azure Kinect Developer Kit connected to a development PC and working, you can start to write code for it. A command line recorder app can be used , storing depth information in an MKV (Matroska Video) format file.
Building your first depth-sensing application
Microsoft provides to work with the Azure Kinect Development Kit. There’s only one library needed, and this provides the objects and methods needed to work with the camera. are connected to the host PC before you configure your device data streams. Devices are identified by their serial number, so you can use this to address a specific camera when working with several connected to the same PC or chained together.
, with a depth image, an IR image, and a color image for each individual image, taken from the device’s stream. Once you have a capture, you can extract the individual images ready for use in your application. Image objects can be delivered to the Azure machine vision APIs, ready for object recognition or anomaly detection. One example Microsoft has used in its demonstrations is an application that uses captured video to detect when a worker on a factory floor gets too close to operating machinery; another detects someone smoking near a gas pump.
A similar process gives you data from . As motion data is captured at a higher rate than image data, you must implement some form of synchronization in your code to avoid losing any data. , including those used by Azure’s speech services.
Although the Azure Kinect hardware captures a lot of data, the SDK functions help transform it into a usable form; for example, adding depth data to an RGB image to produce RGB-D images that are transformed to the viewpoint of the RGB camera (and vice versa). As the two sensors are off-set, this requires warping an image mesh to merge the two cameras’ viewpoints, using your PC’s GPU. Another transform generates a point cloud, allowing you to get depth data for each pixel in your capture. One useful option in the SDK is the ability to . This approach allows bandwidth-limited devices to batch data and deliver it to, say, Azure Stack Edge devices with Cognitive Services containers for batch processing.
, which uses Nvidia’s CUDA GPU parallel processing technology to work with 3-D image data from your device’s depth sensor. A bundled sample app shows some of the features of the SDK, including the ability to track more than one person at a time.
The Body Tracking SDK builds on the Azure Kinect SDK, using it to configure and connect to a device. Captured image data is processed by the tracker, . This contains a collection of skeletal structures for identified bodies, a 2-D index map to help visualize your data, along with the underlying 2-D and 3-D images that were used to construct the tracking data. Each frame can be used to construct animations or to feed information to machine learning tools that can help process tracked positions in relation to a room map or to ideal positions.
Azure’s Cognitive Services are a powerful tool for processing data, and the addition of Azure Kinect makes it possible to use them in a wide range of industrial and enterprise scenarios. With a focus on workplace 3-D image recognition, Microsoft is attempting to show how image recognition can be used to reduce risk and improve safety. There’s even the option of using , which can help build both mixed-reality environments and provide source data for CAD and other design tools. The result is a flexible device that, with a little code, becomes a very powerful sensing device.
Copyright © 2020 IDG Communications, Inc.